Blog - How to fix a Plaster Fire Surround

For best results in all cases ensure that the surface to where the plaster product is to be fixed and installed is clean, dry and flat. Repair major defects; slight defects will not be visible once the job is finished.

1. Set hearth and back slab in position.

2. Set up jambs, at either side of back slab, to correct width. With the jambs sitting in the hearth, mark the position of the fixing lugs on the wall, at the side of the jambs.

3. Set the head of the fire surround on to the jambs in the correct position and mark the ‘lugs’ on the wall.

4. Drill and fit the plastic plugs into the wall at the marked positions. Cut the plaster away so that the lug projection is recessed into the wall.

5. Put the jambs and the head back into position and screw into the plugs. Make good all joints and fixing points.

The Hodkin and Jones high quality fibrous plaster fire surround range can be viewed here. If you require more information regarding fire surrounds contact us on 01246 290890 or email info@hodkin-jones.co.uk.